A1 Racing Gear Parts
Forum rules
The admins take no responsibility for goods sold, bought or swapped on the forums. This forum is purely for making others aware that you have stuff to buy, sell or swap. Please make all transactions of money and goods via PM or email.
Sellers must have a reasonable number of posts on this board to advertise. If you register and advertise straight away then your post will be viewed as spam and removed. Please contact one of the admins, however, if you think your ad warrants special consideration.
Thanks.
The admins take no responsibility for goods sold, bought or swapped on the forums. This forum is purely for making others aware that you have stuff to buy, sell or swap. Please make all transactions of money and goods via PM or email.
Sellers must have a reasonable number of posts on this board to advertise. If you register and advertise straight away then your post will be viewed as spam and removed. Please contact one of the admins, however, if you think your ad warrants special consideration.
Thanks.
-
- Posts: 443
- Joined: Mon Feb 28, 2005 4:18 pm
- Location: Sydney
A1 Racing Gear Parts
Hi all,
After an extensive clean up, I have a whole lot of stuff I'm looking to sell. If anyone needs anything from pedal sets, to potentiometers, controllers, buttons and springs, cables etc, give me a yell.
I have a lot of steering wheels done in suede as per the image below. These have been used on the A1 Wheels. I have a surplus. If you're looking at making your own wheel or cockpit setup, these could be ideal. Maybe you just want to set up a billy cart or other project. These are not street legal and can't be put into a motor vehicle. I'm asking $50 each but if you're interested in more than one, then we can come to some arrangement. I'm very open to offers.
Best way to contact me is by email at rob@a1racinggear.com.au .
Cheers guys.
After an extensive clean up, I have a whole lot of stuff I'm looking to sell. If anyone needs anything from pedal sets, to potentiometers, controllers, buttons and springs, cables etc, give me a yell.
I have a lot of steering wheels done in suede as per the image below. These have been used on the A1 Wheels. I have a surplus. If you're looking at making your own wheel or cockpit setup, these could be ideal. Maybe you just want to set up a billy cart or other project. These are not street legal and can't be put into a motor vehicle. I'm asking $50 each but if you're interested in more than one, then we can come to some arrangement. I'm very open to offers.
Best way to contact me is by email at rob@a1racinggear.com.au .
Cheers guys.
- Cursed
- Posts: 1445
- Joined: Thu Feb 10, 2011 8:46 am
Re: A1 Racing Gear Parts
I wonder if one of these will go on my Fanatec Universal Hub. My G25 rim has worked a treat, but it doesn't have any suede.
Expect an email from me!
Expect an email from me!
- SE1Z
- Posts: 4713
- Joined: Wed Dec 22, 2004 10:38 am
- Location: SW Sydney
Re: A1 Racing Gear Parts
The brake and accelerator potentiometer in my A1 GT's are pretty bad.
How much for replacements?
How much for replacements?
Steve
---
---
-
- Posts: 443
- Joined: Mon Feb 28, 2005 4:18 pm
- Location: Sydney
- Duke
- Dukester Maldonado
- Posts: 11454
- Joined: Tue Jan 23, 2007 9:33 pm
- Location: Melbourne
Re: A1 Racing Gear Parts
Whao, I may be interested in a wheel. What PCD are they Rob?
Dukester
norbs diplomacy lesson 101: "If I was putting words in your mouth, you'd know."
norbs diplomacy lesson 101: "If I was putting words in your mouth, you'd know."
-
- Posts: 443
- Joined: Mon Feb 28, 2005 4:18 pm
- Location: Sydney
Re: A1 Racing Gear Parts
When I was developing the parts for the wheel, I tried to maintain currently used standards. The wheel has 6 mount points and the hub diameter is 70mm.
- SE1Z
- Posts: 4713
- Joined: Wed Dec 22, 2004 10:38 am
- Location: SW Sydney
Re: A1 Racing Gear Parts
Awesome.Robbo wrote:Hi Steve,
$2.50 each + freight.
I'll take 2 of each for brake and accel.
Pm the price plus postage to Sydney and I'll send payment your way asap.
Thanks!
Sent from my Nexus 4 using Tapatalk
Steve
---
---
- SE1Z
- Posts: 4713
- Joined: Wed Dec 22, 2004 10:38 am
- Location: SW Sydney
Re: A1 Racing Gear Parts
Arrived this morning.
Thanks again Rob
Sent from my Nexus 4 using Tapatalk
Thanks again Rob
Sent from my Nexus 4 using Tapatalk
Steve
---
---
- Cursed
- Posts: 1445
- Joined: Thu Feb 10, 2011 8:46 am
Re: A1 Racing Gear Parts
Yep, the wheel arrived here this morning too. Here it is attached to the Universal Hub:
I think it looks and feels just awesome. Thanks!
I think it looks and feels just awesome. Thanks!
You do not have the required permissions to view the files attached to this post.
-
- Posts: 443
- Joined: Mon Feb 28, 2005 4:18 pm
- Location: Sydney
- Duke
- Dukester Maldonado
- Posts: 11454
- Joined: Tue Jan 23, 2007 9:33 pm
- Location: Melbourne
Re: A1 Racing Gear Parts
Just putting this here in case anyone wants one of these wheels from Rob. http://www.ebay.com.au/itm/Racing-Simul ... 43e02d1084
I've been using one on my G25 with a DSD conversion adapter for months & love it.... Feels like a real wheel not a toy & has a larger grip diameter too which helps.
I've been using one on my G25 with a DSD conversion adapter for months & love it.... Feels like a real wheel not a toy & has a larger grip diameter too which helps.
Dukester
norbs diplomacy lesson 101: "If I was putting words in your mouth, you'd know."
norbs diplomacy lesson 101: "If I was putting words in your mouth, you'd know."
- DexterPunk
- Busted ARSE
- Posts: 15218
- Joined: Thu Apr 21, 2005 11:18 pm
- Location: SE Suburbs, Melbourne
- Contact:
Re: A1 Racing Gear Parts
Duke, whats this DSD adapter? I'm guessing that doesn't come with the wheels on ebay?
Every time someone has tried to buy something from Rob, or ask questions here he kinda disappears. I've always loved his stuff, and I'm sure theres some very good reasons why he sometimes goes MIA. But it makes me hesitant.
Every time someone has tried to buy something from Rob, or ask questions here he kinda disappears. I've always loved his stuff, and I'm sure theres some very good reasons why he sometimes goes MIA. But it makes me hesitant.
- Duke
- Dukester Maldonado
- Posts: 11454
- Joined: Tue Jan 23, 2007 9:33 pm
- Location: Melbourne
Re: A1 Racing Gear Parts
I bought my wheel from Rob from this thread & had no issues so can't really comment past that.
The DSD Wheel adapter: http://www.derekspearedesigns.com/wheel-adapters.html
From when I looked it's the most affordable solution to fit standard 70mm bolt pattern wheels to a G25.
I still run the standard G25 paddle shifters with no issue (I have large hands) but using the adapter does move the wheel out & further away from the paddles so the wheel ends up a bit closer to you.
I also bought 2 button switches from JAYCAR & wired them up back into the G25 hub connector.
The DSD Wheel adapter: http://www.derekspearedesigns.com/wheel-adapters.html
From when I looked it's the most affordable solution to fit standard 70mm bolt pattern wheels to a G25.
I still run the standard G25 paddle shifters with no issue (I have large hands) but using the adapter does move the wheel out & further away from the paddles so the wheel ends up a bit closer to you.
I also bought 2 button switches from JAYCAR & wired them up back into the G25 hub connector.
Dukester
norbs diplomacy lesson 101: "If I was putting words in your mouth, you'd know."
norbs diplomacy lesson 101: "If I was putting words in your mouth, you'd know."
- Enforcer-J
- Posts: 6512
- Joined: Wed Oct 12, 2005 11:16 pm
- Location: right on your A.R.S.E.
Re: A1 Racing Gear Parts
I'm steering clear... pun kind of intended
- Shaun
- Posts: 3619
- Joined: Fri Apr 29, 2005 9:24 pm
- Location: Adelaide
Re: A1 Racing Gear Parts
being ebay his feedback would be shit if he screwed people over though?
Hello
- Enforcer-J
- Posts: 6512
- Joined: Wed Oct 12, 2005 11:16 pm
- Location: right on your A.R.S.E.
Re: A1 Racing Gear Parts
I have even less faith in ebay lol. But yeah at least theres some form of protection there.